• Welcome back! Thank you for being a part of this Traders Community. Let's discuss and share :)
    Selamat datang kembali! Trimakasih telah menjadi bagian dari Komunitas Trader ini. Mari berdiskusi dan berbagi :)

New EA [B]iawak Predator V-4.4 [Updated]

Reader mode
Please clarify. Presets for GBPUSD has MM Auto Lot Enabled. Presets for EURGBP and AUDUSD has MM Auto Lot Disabled.
The instructions below states change MM Auto Lot to Disable for all Pairs.

Does MM Auto Lot Disable include GBPUSD?

All pairs (GBPUSD x 2 charts - $250, EURGBP and AUDUSD - $500) required Balance $750?

Thanks.

Requirement Balance : - Balance $250 for 1 Pair with 2 Charts > GBPUSD - Set Trend Breakout and > GBPUSD - Set Trend Pullback
or > EURGBP and AUDUSD - Balance $500 for All Pairs Recommended >
Important : Change [MM Auto Lot] to Disable for All Pairs > Base Lot = 0.01
Balance $1000 set Base Lot = 0.02 - Balance more than $1000 every step $500 Increase Base Lot ( + 0.01) Note. Smaller Base Lot more Safety
 
pipmenow said:
Please clarify. Presets for GBPUSD has MM Auto Lot Enabled. Presets for EURGBP and AUDUSD has MM Auto Lot Disabled.
The instructions below states change MM Auto Lot to Disable for all Pairs.
Does MM Auto Lot Disable include GBPUSD?
All pairs (GBPUSD x 2 charts - $250, EURGBP and AUDUSD - $500) required Balance $750?
Thanks.
Requirement Balance : - Balance $250 for 1 Pair with 2 Charts > GBPUSD - Set Trend Breakout and > GBPUSD - Set Trend Pullback
or > EURGBP and AUDUSD - Balance $500 for All Pairs Recommended >
Important : Change [MM Auto Lot] to Disable for All Pairs > Base Lot = 0.01
Balance $1000 set Base Lot = 0.02 - Balance more than $1000 every step $500 Increase Base Lot ( + 0.01) Note. Smaller Base Lot more Safety
Click to expand...
yess if you run EA in all pairs that i mentioned... GBPUSD AUDUSD EURGBP set MM to Disable... need minimum balance $500 for runing all pairs that i mentioned with setfile... better if balance $750...

gocku74 said:
Version 5.6 trial expired in august too?? thanks...
Click to expand...
iyess
 
dear alwaysprofit
i have seen that on set EURGBP the news are avoid for all pairs and not for only EUR & GBP news.
is it correct or can i change in "pair only"?
tks
 
Hi, If I have a micro account with $ 500 can I use 0.1 Lot for 1 Pair with 2 Charts > GBPUSD - Set Trend Breakout and > GBPUSD - Set Trend Pullback?
 
Raffus said:
dear alwaysprofit
i have seen that on set EURGBP the news are avoid for all pairs and not for only EUR & GBP news.
is it correct or can i change in "pair only"?
tks
Click to expand...
About ffca i have some trouble, today and yesterday i see on calendar 10.30 gbp news , but the ea still for NOT close all the position opening before, and also if i don't do in manual mode the calendar date isn't update yourself) today i open metatrader and i can see the date for yesterday ....i don't know if FFcal really work or not?
 
Raffus said:
dear alwaysprofit
i have seen that on set EURGBP the news are avoid for all pairs and not for only EUR & GBP news.
is it correct or can i change in "pair only"?
tks
Click to expand...
if you want to change to Active Chart only.. no problem...
redhawk said:
Hi, If I have a micro account with $ 500 can I use 0.1 Lot for 1 Pair with 2 Charts > GBPUSD - Set Trend Breakout and > GBPUSD - Set Trend Pullback?
Click to expand...
as i know...micro account is different with cent account... $100 cent = $1 normal... $100 micro = $100 normal too...but differences is on LOT ...CONTRACT SIZE on broker... normal account ECN 1 LOT = $100,000 CONTRACT SIZE. in micro account 1 LOT = $10,000 CONTRACT SIZE ...
so if in ECN account trade 1 Lot -> Moving Profits or Loss /Pips = $10 .... but in Micro account if trade 1 Lot -> Moving Profits or Loss /Pips = $1 ...
finally...if your micro account conditions is true as i mentioned... THE ANSWER is YESS... you can change base lot to 0.1 ...
thank you
gocku74 said:
About ffca i have some trouble, today and yesterday i see on calendar 10.30 gbp news , but the ea still for NOT close all the position opening before, and also if i don't do in manual mode the calendar date isn't update yourself) today i open metatrader and i can see the date for yesterday ....i don't know if FFcal really work or not?
Click to expand...
FFCPredator its oke... just make sure your windows time is displaying correct time at your timezone choosed... if your windows time didn't showing actual time... EA fail to count minutes from FFCPredator...and FFCPredator showing failed time...
check image below... for since right now...countdown for ADP Non-Farm tomorrow is 1440 minutes left...
and it should be in your VPS ...information minutes left above is same ...
 

Attachments

  • ffctimes.png
    ffctimes.png
    19.2 KB · Views: 36
In Predator set configuration I see timezone GMT+3... but I have timezone of Server and Broker MT4 GMT+2, I need to change it in configuration of Predator from GMT+3 to GMT+2 and change also time begin and end trades?
 
alwaysprofit said:
if you want to change to Active Chart only.. no problem...

as i know...micro account is different with cent account... $100 cent = $1 normal... $100 micro = $100 normal too...but differences is on LOT ...CONTRACT SIZE on broker... normal account ECN 1 LOT = $100,000 CONTRACT SIZE. in micro account 1 LOT = $10,000 CONTRACT SIZE ...
so if in ECN account trade 1 Lot -> Moving Profits or Loss /Pips = $10 .... but in Micro account if trade 1 Lot -> Moving Profits or Loss /Pips = $1 ...
finally...if your micro account conditions is true as i mentioned... THE ANSWER is YESS... you can change base lot to 0.1 ...
thank you

FFCPredator its oke... just make sure your windows time is displaying correct time at your timezone choosed... if your windows time didn't showing actual time... EA fail to count minutes from FFCPredator...and FFCPredator showing failed time...
check image below... for since right now...countdown for ADP Non-Farm tomorrow is 1440 minutes left...
and it should be in your VPS ...information minutes left above is same ...
Click to expand...
Sir i check now about non farm news remain 1286 minute and server broker watch is 17.53 now...but about the news show in the windows all is valid for EA or some yes some no...
 
Also i see this advise on mt4 expert message :
2018.07.04 18:01:58.430 FFCPredator GBPUSD,M1: FFC: xml file is out of date
 
redhawk said:
In Predator set configuration I see timezone GMT+3... but I have timezone of Server and Broker MT4 GMT+2, I need to change it in configuration of Predator from GMT+3 to GMT+2 and change also time begin and end trades?
Click to expand...
no need to change begin and end hour...
if your broker time is GMT+3 ... left 0 (zero) ....
if your broker time is GMT+2 ... change input to = 1
if your broker time is GMT+4 ...change input to = -1 ..
and so on...
hope this clear...
 
gocku74 said:
Sir i check now about non farm news remain 1286 minute and server broker watch is 17.53 now...but about the news show in the windows all is valid for EA or some yes some no...
Click to expand...
thats mean your windows time is correct...
yess...as i mentioned more than 100 times... not all high impact news..
please see in charts....there is showing very clear...only AVOIDED NEWS...
 
gocku74 said:
Also i see this advise on mt4 expert message :
2018.07.04 18:01:58.430 FFCPredator GBPUSD,M1: FFC: xml file is out of date
Click to expand...
ignore it if the news list is displayed... if in expert bottom tab displaying error code... that is clear any something error...
every EA attached in to charts... FFCPredator always check old xml file in local computer..then checking in forexfactory news list in weekly then download it...then replace it ...so ignore it...
 
alwaysprofit said:
ignore it if the news list is displayed... if in expert bottom tab displaying error code... that is clear any something error...
every EA attached in to charts... FFCPredator always check old xml file in local computer..then checking in forexfactory news list in weekly then download it...then replace it ...so ignore it...
Click to expand...
About display watch on my VPS and Broker time zone , need to show the same time? thanks
 
Reader mode
You must log in or register to reply here.
Back
Top