• Welcome back! Thank you for being a part of this Traders Community. Let's discuss and share :)
    Selamat datang kembali! Trimakasih telah menjadi bagian dari Komunitas Trader ini. Mari berdiskusi dan berbagi :)

New EA [B]iawak Predator V-4.4 [Updated]

Reader mode
uchimi said:
My VPS = Broker time（IC markets)
It is the same time.

Reboot, Reload

Again, I get the same error.
↓

2017.08.17 17: 47: 56.772 FFC GBPUSD, M1: can not set timer (3600)
Click to expand...

So, guys, if you take a look at your Market-Watch in the MT4 Terminal and to the VPS Time, you're saying that there's matching the showed Hours - the same Time ....OK! [...please, see my Uploaded files to be sure that you got what i'm telling you!]
This is crucial, otherwise the EA's Function_Call will be not synchronized with Broker's Time and will Stop/Start the running OUT of the right News Time.
Market Watch.JPG <<< Here the Time is not synchronized !!! >>> VPS Time.JPG


About the Error_message... after attaching the EA to the Chart, just Click F7 > then > OK ...and watch 2 things: 1. Into the Experts-Tab you should see that the EA was re-Initialized but after that NO more repeated the FFC Error_message; 2. Sometimes the FFC - Info - Panel DOES NOT! appear or is flickering - because of the Updating rhythm - but if you watch the Upper right corner of your Chart - where is the EA's smile - and see some Parameters/Numbers ORANGE coloured, that means your FFC is already working; you don't have to be worry about it!... [...please, see my attached files!]

FFC - Panel Info.JPG FFC - Parameters.JPG

As i said before, most important is to make coincide VPS GMT = Broker's GMT ...if NOT you could be in real trouble >>> the EA is NOT filtering the News at all !!!!!!!




Good Luck to All !!!


BUBBY
 

Attachments

  • Market Watch.JPG
    Market Watch.JPG
    10.7 KB · Views: 72
Because I am not running ea on vps and only will use when online
I have big loss floating and worry will losing more hence I cut loss manually
 
blackking said:
Because I am not running ea on vps and only will use when online
I have big loss floating and worry will losing more hence I cut loss manually
Click to expand...

@ blackking >>> Sorry,mate, for your trouble !!!... But there's one thing that i really don't understand: if you say you have BIG Losses, why don't you CLOSE them all - the floating Negative trades ??? ...Just CUT those losses! ...or you prefer to LOSE your ENTIRE Account Balance ?!?!?!?.... Doesn't make sense to you ???

How do you know that the Market will turn in your favour ???... Maybe you can still RECOVER your lost money; needs time and patience, but still have ....ONE MORE CHANCE to have back what you've LOST..... Be rational !!!! Don't wanna be tough with you.... just hope this will help you to change the optic in this situation!

If you have the "resources" would be better to use a VPS - it's about the Orders-Execution ...sometimes the EA really doesn't open the Orders because of the Latency - must be LOW - very LOW better....



Take care your $$$ !!!!! All the best !!!!

BUBBY
 
Last edited:
BUBBY said:
So, guys, if you take a look at your Market-Watch in the MT4 Terminal and to the VPS Time, you're saying that there's matching the showed Hours - the same Time ....OK! [...please, see my Uploaded files to be sure that you got what i'm telling you!]
This is crucial, otherwise the EA's Function_Call will be not synchronized with Broker's Time and will Stop/Start the running OUT of the right News Time.
View attachment 32555 <<< Here the Time is not synchronized !!! >>> View attachment 32557


About the Error_message... after attaching the EA to the Chart, just Click F7 > then > OK ...and watch 2 things: 1. Into the Experts-Tab you should see that the EA was re-Initialized but after that NO more repeated the FFC Error_message; 2. Sometimes the FFC - Info - Panel DOES NOT! appear or is flickering - because of the Updating rhythm - but if you watch the Upper right corner of your Chart - where is the EA's smile - and see some Parameters/Numbers ORANGE coloured, that means your FFC is already working; you don't have to be worry about it!... [...please, see my attached files!]

View attachment 32558 View attachment 32559

As i said before, most important is to make coincide VPS GMT = Broker's GMT ...if NOT you could be in real trouble >>> the EA is NOT filtering the News at all !!!!!!!




Good Luck to All !!!


BUBBY
Click to expand...

image)

VPS-1 Market-Watch in the MT 4 Terminal and to the VPS Time = Different

VPS 2 Market - Watch in the MT 4 Terminal and to the VPS Time = Same


Both, the same error appears.
↓
2017.08.18 06: 53: 22.504 FFC GBPUSD, M1: can not set timer (3600)
 

Attachments

  • VPS-1.png
    VPS-1.png
    379.5 KB · Views: 83
  • VPS-2.png
    VPS-2.png
    380.2 KB · Views: 78
uchimi said:
image)

VPS-1 Market-Watch in the MT 4 Terminal and to the VPS Time = Different

VPS 2 Market - Watch in the MT 4 Terminal and to the VPS Time = Same


Both, the same error appears.
↓
2017.08.18 06: 53: 22.504 FFC GBPUSD, M1: can not set timer (3600)
Click to expand...

@ uchimi >>> My Dear, you missed my point!... The CORRECT Setup in your case is the VPS-2 [... Image 2] > VPS Time = Broker's Time. In both cases you'll see the SAME Info in the FFC Panel; the Difference is : in VPS-1 case, when the High-Impact-News will be released the EA will NOT "react" !!!... or probably it will open trades because of the Volatility... The EA will Stop/Start Trading Before/After News = 30min./60min. - but ONLY 2 hours LATER. The EA is running accordingly to the Broker's GMT - it acts as the Market moves - in real Time [...Broker's Time-Zone]

You'll say: why this ???.... Because the EA reads the News-Info from the FFC...xml - file [...as showed in the Panel] , but FFC displays the Info in the VPS Time, while the News Release occurs in the Broker's Time. So, a Difference of 2 hours between the VPS and Broker's GMT means real trouble; actually your trading it's "Off the rails"...

One more thing... Why have you attached the FFC-Indicator to the Chart ??? ...i know because i can see ALL the News displayed, not only the most important that the Expert takes into its "calculations"... You DON'T have to do that, buddy !!! ... ONLY the EA goes in the Chart - every single Chart you trade!

This morning in my Charts the FFC Info-Panel "disappeared" , but i know it's still there and working because i can see the Orange NUMBERS in the corner; so, it's all fine! Probably Monday i'll see it again....
---------------------------------------------------------------------------------------------------------------------------------------

So, let's recap your case: VPS-2 is your RIGHT GMT SetUp If you have the FFC.mq4 file [...NOT only .ex4 ...see Attached file], you could put it in the MQL4/Indicators - folder and Re-start your MT4 Terminal to compile it again - maybe this will change "something". If you see again the FFC message Error in the Experts-Tab, click F7 > then > OK and if there are the Orange-Numbers - as i said before - LET IT RUN !!!.... It's ALL OK !!!!

Hope this helps You !!!!!!!!!!

Best Things!

BUBBY
 

Attachments

Some of - my Yesterday Trades - ......

Yesterday Trades - 2017.08.17.JPG


It's Martingale ....it's DANGEROUS !!! >>> 100% TRUE

It's Martingale... it's PROFITABLE !!! >>> 100% TRUE
.......................................................................................................................................................................................
Are You All TRADERS ??? ...mean ...Real TRADERS.....


...then KEEP an EYE on it and will MAKE you .......$$$$$$$$ !!!!!!!!! >>> 1000 % TRUE



Greeeeennn Piiiippssss, fellows !!!!!!!!!!!!!!!!
 
BUBBY oh man how well you described things? even simple small things described in a way that it becomes complicated . plz do simple math just 1 2 3 in describing things.....................
otherwise nice stuff
 
BUBBY said:
@ uchimi >>> My Dear, you missed my point!... The CORRECT Setup in your case is the VPS-2 [... Image 2] > VPS Time = Broker's Time. In both cases you'll see the SAME Info in the FFC Panel; the Difference is : in VPS-1 case, when the High-Impact-News will be released the EA will NOT "react" !!!... or probably it will open trades because of the Volatility... The EA will Stop/Start Trading Before/After News = 30min./60min. - but ONLY 2 hours LATER. The EA is running accordingly to the Broker's GMT - it acts as the Market moves - in real Time [...Broker's Time-Zone]

You'll say: why this ???.... Because the EA reads the News-Info from the FFC...xml - file [...as showed in the Panel] , but FFC displays the Info in the VPS Time, while the News Release occurs in the Broker's Time. So, a Difference of 2 hours between the VPS and Broker's GMT means real trouble; actually your trading it's "Off the rails"...

One more thing... Why have you attached the FFC-Indicator to the Chart ??? ...i know because i can see ALL the News displayed, not only the most important that the Expert takes into its "calculations"... You DON'T have to do that, buddy !!! ... ONLY the EA goes in the Chart - every single Chart you trade!

This morning in my Charts the FFC Info-Panel "disappeared" , but i know it's still there and working because i can see the Orange NUMBERS in the corner; so, it's all fine! Probably Monday i'll see it again....
---------------------------------------------------------------------------------------------------------------------------------------

So, let's recap your case: VPS-2 is your RIGHT GMT SetUp If you have the FFC.mq4 file [...NOT only .ex4 ...see Attached file], you could put it in the MQL4/Indicators - folder and Re-start your MT4 Terminal to compile it again - maybe this will change "something". If you see again the FFC message Error in the Experts-Tab, click F7 > then > OK and if there are the Orange-Numbers - as i said before - LET IT RUN !!!.... It's ALL OK !!!!

Hope this helps You !!!!!!!!!!

Best Things!

BUBBY
Click to expand...


Please look at the image.

※Correct ?

Market - Watch in the MT 4 Terminal and to the VPS Time = Same
&
I did put it in the MQL 4 / Indicators - folder and Re-start my MT 4 Terminal to compiled it again
 

Attachments

  • RESTART.png
    RESTART.png
    362.7 KB · Views: 72
Good Good Good GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood GoodGood Good . EA EXECELENT , I AM FRON BRAZIL
 
uchimi said:
Please look at the image.

※Correct ?

Market - Watch in the MT 4 Terminal and to the VPS Time = Same
&
I did put it in the MQL 4 / Indicators - folder and Re-start my MT 4 Terminal to compiled it again
Click to expand...

Yesss, mate, you did ALL CORRECTLY!... and i think it's all OK in your Terminal... i see even the Orange-Params.... Now click F7 [...the Function on your PC keyboard] ...you know it will open the EA Settings/Inputs [...it's like Re-loading the EA, but keeps your Sets, not Reset anything!] ....and then click OK[...Enter] ...and watch in the Experts-Tab !!!! Do you still see that Error, or just the EA's Re-Initializing ?????

Also, you must Rename the EA in the Experts folder ....i mean:

(B)iawak Predator V-4.7.ex4 NOT! Soe_Hoe.com_(B)iawak Predator V-4.7.ex4


Do it ....now !!!! I'm here present !!!!!!!!!
 
Last edited:
uchimi said:
Please look at the image.

※Correct ?

Market - Watch in the MT 4 Terminal and to the VPS Time = Same
&
I did put it in the MQL 4 / Indicators - folder and Re-start my MT 4 Terminal to compiled it again
Click to expand...
why you not read full my first post... i have already mention about FFC Can't set timer....
 
alwaysprofit said:
why you not read full my first post... i have already mention about FFC Can't set timer....
Click to expand...

He just synchronized the VPS Time Zone with the Broker's GMT, but he's worried about other thing: the FFC-Panel does NOT appear in the Chart !?!?!?!.... Today not even mine is visible, but the EA works fine.... That's all !!!!
 
Reader mode
You must log in or register to reply here.
Back
Top